FRONT AXLE HUB INSTALLATION

PROCEDURE

1. INSTALL FRONT AXLE HUB SUB-ASSEMBLY

   
   

   1. Install the front axle hub sub-assembly with the 4 bolts.

      Torque:

      69 N*m  { 704 kgf*cm, 51 ft.*lbf }

2. INSPECT FRONT AXLE HUB BEARING LOOSENESS

   Click here

3. INSPECT FRONT AXLE HUB RUNOUT

   Click here

4. INSTALL FRONT DISC (for 17 inch Front Disc Brake)

   Click here

5. INSTALL FRONT DISC (for 18 inch Front Disc Brake)

   Click here

6. CONNECT FRONT DISC BRAKE CALIPER ASSEMBLY

   
   

   1. Connect the front disc brake caliper assembly to the steering knuckle with the 2 bolts.

      Torque:

      135 N*m  { 1377 kgf*cm, 100 ft.*lbf }

      Note

      
      

      • Do not twist the front brake hose when installing the front disc brake caliper.

      • Make sure that there are no foreign objects or damage to the threads of the bolts.

      • Do not overtighten the bolts because the steering knuckle is made of aluminum and may be damaged.

7. CONNECT SPEED SENSOR CONNECTOR

   
   

   1. Connect the speed sensor connector to the front speed sensor.

      Note

      Do not twist the sensor wire.

8. INSTALL FRONT WHEEL

   Click here

9. INSPECT SPEED SENSOR SIGNAL

   Click here