REAR AXLE HUB BOLT REPLACEMENT

PROCEDURE


  1. REMOVE REAR WHEEL

  2. DISCONNECT REAR DISC BRAKE CALIPER ASSEMBLY

    Click here

  3. REMOVE REAR DISC

    Click here

  4. REMOVE REAR AXLE HUB BOLT


    1. A000OH9E01

      Using SST, remove the rear axle hub bolt.

      SST
      09628-10011

      Note

      Do not damage the threads of the hub bolts.

  5. INSTALL REAR AXLE HUB BOLT


    1. A000QO0E01
      Text in Illustration
      *1 Nut (M12 x P1.5 mm)
      *2 Washer
      *a Turn
      *b Hold

      Install a washer and nut to a new bolt as shown in the illustration.

    2. Using a screwdriver or an equivalent to hold the hub and bearing assembly, install the rear axle hub bolt by tightening the nut.

      Note

      Do not damage the threads of the hub bolts.

  6. INSTALL REAR DISC

    Click here

  7. ADJUST PARKING BRAKE SHOE CLEARANCE

    Click here

  8. INSTALL REAR DISC BRAKE CALIPER ASSEMBLY

    Click here

  9. INSTALL REAR WHEEL

    Torque:
    103 N*m  { 1050 kgf*cm, 76 ft.*lbf }