FRONT CAMERA INSTALLATION

CAUTION / NOTICE / HINT

Note


  • When replacing the forward recognition camera, replace it with a new one.

  • Do not touch the camera lens. If the camera lens has been touched, do not use the forward recognition camera.

  • If the forward recognition camera has been struck or dropped, replace it with a new one.

  • If the forward recognition camera is not properly installed, forward recognition camera optical axis learning cannot be performed properly. Make sure the forward recognition camera is installed securely.

  • Replace the forward recognition camera if there is any foreign matter on the camera lens.

  • When replacing the windshield glass of a vehicle equipped with a forward recognition camera, make sure to use a Lexus genuine part. If a non-Lexus genuine part is used, the forward recognition camera may not be able to be installed due to a missing bracket, or the road sign assist system, LKA/LDA system, forward recognition camera system, dynamic radar cruise control system, pre-crash safety system. automatic high beam system or adaptive high beam system may not operate properly due to a difference in the transmissivity of the windshield glass or the shape of the black ceramic border.

  • If the forward recognition camera bracket is deformed or damaged, replace it together with the windshield glass.

  • If there is any foreign matter on the area of the windshield glass in front of the forward recognition camera, clean the windshield glass before installing the forward recognition camera.

PROCEDURE


  1. INSTALL FORWARD RECOGNITION WITH HEATER HOOD SUB-ASSEMBLY (w/ Camera Heater)

    Note

    During work, do not touch the shaded area on the forward recognition with heater hood sub-assembly shown in the illustration.

    B002BGL

    1. B002BQKC02
      B002B6O Install in this Direction (1)
      B002BBR Install in this Direction (2)
      B002BQR Heater Area

      Attach the guide in the direction indicated by the arrow (1) in the illustration.

    2. Attach the claw in the direction indicated by the arrow (2) in the illustration.

      Note

      Do not press the heater area.

    3. B002C1Y

      Attach the guide to install the wire harness to the forward recognition bracket as shown in the illustration.

    4. B002BSP

      Attach the connector clamp to install the forward recognition with heater hood sub-assembly.

    5. B002B6D

      Connect the connector.

  2. INSTALL FORWARD RECOGNITION CAMERA


    1. When using a new forward recognition camera:


      1. B002C45

        Remove the protective film.

        Note

        Do not touch the camera lens after removing the protective film.

    2. B002C4IC02
      B002B6O Connector
      B002BBR Install in this Direction

      w/o Camera Heater:


      1. Attach the 4 guides as shown in the illustration.

        Note

        Do not touch the camera lens.

    3. B002BTUC02
      B002B6O Connector
      B002BBR Install in this Direction

      w/ Camera Heater:


      1. Attach the 4 guides as shown in the illustration.

        Note

        Do not touch the camera lens.

    4. Connect the connector.

  3. INSTALL FORWARD RECOGNITION LATCH

    Note

    Before installing the forward recognition latch, make sure that the forward recognition camera is securely installed to the vehicle.


    1. B002BZZC02
      B002B6O Install in this Direction (1)
      B002BBR Install in this Direction (2)

      w/o Camera Heater:


      1. Attach the 4 guides and 2 claws to install the forward recognition latch as shown in the illustration.

    2. B002B5VC02
      B002B6O Install in this Direction (1)
      B002BBR Install in this Direction (2)

      w/ Camera Heater:


      1. Attach the 4 guides and 2 claws to install the forward recognition latch as shown in the illustration.

  4. INSTALL NO. 1 FORWARD RECOGNITION COVER


    1. B002BICC02
      B002B6O Install in this Direction

      Attach the 2 clips and 2 guides to install the No. 1 forward recognition cover as shown in the illustration.

  5. INSTALL NO. 2 FORWARD RECOGNITION COVER


    1. B002BPEC02
      B002B6O Install in this Direction (1)
      B002BBR Install in this Direction (2)

      Attach the 2 guides and 2 claws to install the No. 2 forward recognition cover as shown in the illustration.

  6. ADJUST FORWARD RECOGNITION CAMERA


    1. If the forward recognition camera has been replaced or the windshield glass has been removed and installed, it is necessary to perform Forward Recognition Camera Learning. Click here