ROAD SIGN ASSIST SYSTEM SYSTEM DESCRIPTION


  1. ROAD SIGN ASSIST SYSTEM DESCRIPTION


    1. The road sign assist system uses the forward recognition camera to recognize traffic signs and provides information to the driver on the multi-information display.

  2. ROAD SIGN ASSIST SYSTEM CONTROL


    1. Control Pattern 1:

      A000R2XE02
      Text in Illustration
      *a Multi-information Display *b Traffic Sign
      *c Distance - -

      After a sign is recognized by the forward recognition camera and the vehicle passes by, the sign is displayed on the multi-information display. If no new signs are recognized while a sign is displayed, the system assesses the reliability of the currently displayed sign and clears the display.

    2. Control Pattern 2:

      A000OOCE02
      Text in Illustration
      *a Power Switch off *b Power Switch on (IG)
      *c Multi-information Display - -

      If a speed limit sign was displayed when the previous trip ended, when the power switch is turned on (IG), the same sign is displayed again.

    3. Control Pattern 3:

      A000OYME02
      Text in Illustration
      *a Multi-information Display *b Traffic Sign

      While a sign is displayed, if the currently traveled road changes due to a left or right turn, etc., the displayed sign is cleared.

  3. DISPLAY SPECIFICATIONS


    1. Road signs recognized by the forward recognition camera are divided into the following categories and displayed on the multi-information display.

      Supported Road Sign Multi-information Display Notification Function Operation
      Category Type Multi-information Display Buzzer
      Speed Limit Maximum speed limit/End of speed limit A000NC9

      Excess speed notification

      A000NKS

      (Display inverts)

      		 Sounds*1
      No Overtaking No overtaking/End of no overtaking A000POT

      No overtaking notification

      A000PIY

      (Blinks)

      		 Sounds*1
      End of prohibition A000NU7 - -
      Supplemental Signs (display simultaneously with speed limit) Wet A000OO8 - -
      Rain A000RLY - -
      Ice A000NIY - -
      Time restriction A000PZA - -
      Ramp way*2 A000QZB - -
      Blank*3 A000SME - -
      No entry*4 A000RVE

      No entry notification

      A000SNI

      (Blinks)

      		 Sounds*1

      • *1: Through the customization settings, the buzzer can be made to sound during warnings. However, a buzzer warning will not occur when exceeding the speed limit with a supplemental sign present.

      • *2: This sign is not displayed when performing a lane change without operating the turn signal.

      • *3: The display is blank when the system is unable to recognize a meaning of supplemental sign.

      • *4: w/ Navigation System

    2. The display format for signs displayed on the multi-information display can be changed using the steering pad switch assembly.