MILLIMETER WAVE RADAR SENSOR REMOVAL

PROCEDURE


  1. REMOVE ENGINE ROOM SIDE COVER

    Click here

  2. REMOVE COOL AIR INTAKE DUCT SEAL

    Click here

  3. REMOVE MILLIMETER WAVE RADAR SENSOR ASSEMBLY


    1. A000P0I

      Disconnect the connector.

    2. A000RZ5E04
      Text in Illustration
      *a Bolt
      *b Screw

      Remove the 2 bolts and 2 screws.

    3. Detach the 2 guides and remove the millimeter wave radar sensor assembly.

      Note

      Do not reuse the millimeter wave radar sensor assembly if it has been dropped or subjected to a severe impact.