OIL PUMP REASSEMBLY

PROCEDURE


  1. INSTALL OIL PUMP ROTOR SET


    1. A000SZ4E05
      Text in Illustration
      *1 Mark

      Coat the drive and driven rotors with engine oil and place them into the timing chain cover with the marks facing up (oil pump cover side). Check that the rotors rotate smoothly.

  2. INSTALL OIL PUMP COVER


    1. A000NMYE12

      Install the oil pump cover with the 8 bolts.

      Torque:
      9.1 N*m  { 93 kgf*cm, 81 in.*lbf }
      Bolt Length
      Item Specified Condition
      Bolt A 22 mm (0.866 in.)
      Bolt B 40 mm (1.58 in.)

  3. INSTALL OIL PUMP RELIEF VALVE


    1. Coat the oil pump relief valve with engine oil.

    2. Insert the relief valve and relief valve spring into the oil pump cover hole.

    3. Using a 27 mm socket wrench, install the plug.

      Torque:
      49 N*m  { 500 kgf*cm, 36 ft.*lbf }