OIL LEVEL SENSOR REMOVAL

PROCEDURE


  1. DRAIN ENGINE OIL

    Click here

  2. REMOVE ENGINE UNDER COVER

    Click here

  3. REMOVE FRONT SUSPENSION MEMBER BRACE

    Click here

  4. REMOVE NO. 2 ENGINE UNDER COVER

    Click here

  5. DISCONNECT INVERTER COOLING PIPE


    1. A000SHE

      Remove the 3 bolts and disconnect the inverter cooling pipe.

  6. REMOVE ENGINE OIL LEVEL SENSOR


    1. A000QRS

      Disconnect the engine oil level sensor connector.

    2. Remove the 4 bolts and engine oil level sensor.

    3. A000SRTE01
      Text in Illustration
      *1 Cutting Position
      *2 Supply Part

      Cut off the gasket as shown in the illustration.

    4. Remove the gasket from the engine oil level sensor.

      Tech Tips

      After cutting away the parts of the gasket shown in the illustration, remove only the outer part of the gasket.