OIL PRESSURE SWITCH INSTALLATION

PROCEDURE

1. INSTALL ENGINE OIL PRESSURE SWITCH ASSEMBLY

   
   

   1. Apply adhesive to 2 or 3 threads of the engine oil pressure switch.

      Adhesive
      Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent

      Note

      Do not apply adhesive to the oil inlet port of the engine oil pressure switch.

   2. Using a 24 mm deep socket wrench, install the engine oil pressure switch.

      Torque:

      15 N*m  { 153 kgf*cm, 11 ft.*lbf }

      Note

      Do not start the engine for at least 1 hour after installation.

   3. Connect the engine oil pressure switch connector.

2. ADD ENGINE OIL

   Click here

3. INSPECT FOR OIL LEAK

   Click here

4. INSPECT ENGINE OIL LEVEL

   Click here

5. INSTALL NO. 1 AIR CLEANER INLET

   Click here

6. INSTALL COOL AIR INTAKE DUCT SEAL

   Click here

7. INSTALL ENGINE ROOM SIDE COVER

   Click here