THERMOSTAT INSTALLATION

PROCEDURE

1. INSTALL WATER INLET WITH THERMOSTAT SUB-ASSEMBLY

   
   

   1. Install a new gasket and the water inlet with thermostat sub-assembly with the 3 nuts.

      Torque:

      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

2. CONNECT NO. 6 WATER BY-PASS HOSE

   
   

   1. Connect the No. 6 water by-pass hose to the water inlet assembly and secure it with the clip.

3. CONNECT NO. 2 RADIATOR HOSE

   
   

   1. Connect the No. 2 radiator hose to the water inlet with thermostat sub-assembly and secure it with the clip.

4. ADD ENGINE COOLANT

   Click here

5. INSPECT FOR COOLANT LEAK

   Click here

6. INSTALL NO. 1 AIR CLEANER INLET

   Click here

7. INSTALL COOL AIR INTAKE DUCT SEAL

   Click here

8. INSTALL ENGINE ROOM SIDE COVER

   Click here

9. INSTALL V-BANK COVER SUB-ASSEMBLY

   Click here