EXHAUST PIPE REMOVAL

PROCEDURE


  1. REMOVE NO. 1 REAR FLOOR BOARD SUB-ASSEMBLY


    1. A000NP2E01

      Remove the 5 clips labeled B in the illustration.

    2. Loosen the 6 clips labeled A in the illustration and remove the No. 1 rear floor board sub-assembly.

  2. REMOVE NO. 2 REAR FLOOR BOARD SUB-ASSEMBLY


    1. A000PT3E01

      Remove the 5 clips labeled B in the illustration.

    2. Loosen the 6 clips labeled A in the illustration and remove the No. 2 rear floor board sub-assembly.

  3. REMOVE FRONT CENTER FLOOR BRACE


    1. A000R5A

      Remove the 6 bolts and 2 nuts.

      Text in Illustration
      B002B6O Bolt
      B002BBR Nut
      B002BRO Clip

    2. Loosen the 2 clips and remove the front center floor brace.

  4. DISCONNECT HEATED OXYGEN SENSOR (for Bank 1 Sensor 2)


    1. A000O8RE03
      Text in Illustration
      *1 Grommet

      Disconnect the grommet of the heated oxygen sensor.

    2. A000S51E03

      Using SST, disconnect the heated oxygen sensor.

      SST
      09224-00010

  5. REMOVE HEATED OXYGEN SENSOR (for Bank 2 Sensor 2)


    1. A000NJR

      Disconnect the heated oxygen sensor connector.

    2. A000STDE04

      Using SST, remove the heated oxygen sensor.

      SST
      09224-00010

  6. REMOVE FRONT EXHAUST PIPE ASSEMBLY


    1. A000OID

      Remove the 4 nuts, 8 bolts, 4 compression springs and front exhaust pipe assembly.

    2. Remove the 4 gaskets.

    3. w/ Towing Package:

      Tech Tips

      Only perform this procedure when replacement of the front No. 1 exhaust pipe protector is necessary.

      A000T72

      1. Remove the bolt and clamp.

      2. Remove the 2 bolts, 2 nuts, exhaust pipe protector stay and front No. 1 exhaust pipe protector.

  7. REMOVE TAILPIPE RH


    1. A000OFL

      Remove the tailpipe RH from the 3 exhaust pipe supports.

  8. REMOVE TAILPIPE LH


    1. A000QPJ

      Remove the tailpipe LH from the 3 exhaust pipe supports.