CANISTER INSPECTION

PROCEDURE


  1. CHECK CHARCOAL CANISTER ASSEMBLY


    1. Visually check the charcoal canister assembly.


      1. Visually check the charcoal canister assembly for cracks or damage.

      2. If cracks or damage are found, replace the charcoal canister assembly.

    2. A000SBPE01
      Text in Illustration
      *a Port A
      *b Port B
      *c Port C
      B002B6O Air

      Close port C, apply compressed air to port A and check that air flows out from port B.

      If the result is not as specified, replace the fuel suction plate sub-assembly.

    3. A000NKLE01
      Text in Illustration
      *a Port A
      *b Port B
      *c Port C
      B002B6O Air

      Close port C, apply compressed air to port B and check that air flows out from port A.

      If the result is not as specified, replace the fuel suction plate sub-assembly.

    4. A000S9WE01
      Text in Illustration
      *a Port A
      *b Port B
      *c Port C
      B002B6O Air

      Apply compressed air to port B and check that air flows out from port A and port C.

      If the result is not as specified, replace the fuel suction plate sub-assembly.

    5. A000NW5E01
      Text in Illustration
      *a Port A
      *b Port B
      *c Port C
      *d Vacuum Pump

      Close port A and port C, and apply compressed air to port B to check for leaks.

      If the result is not as specified, replace the fuel suction plate sub-assembly.