FUEL PRESSURE SENSOR REMOVAL

PROCEDURE


  1. REMOVE INTAKE MANIFOLD

    Click here

  2. REMOVE NO. 3 WATER BY-PASS PIPE


    1. Remove the 2 water hose sets.

    2. A000PMT

      Disconnect the 2 heater water hoses.

    3. Detach the 2 wire harness clamps from the No. 3 water by-pass pipe.

    4. Remove the bolt.

    5. Disconnect the 2 water by-pass hoses and remove the No. 3 water by-pass pipe.

  3. REMOVE NO. 2 FUEL PIPE SUB-ASSEMBLY

    Click here

  4. REMOVE FUEL PRESSURE SENSOR

    A000R7Q

    1. Disconnect the connector.

      Note

      Do not pull the wire harness of the fuel pressure sensor excessively.

    2. Remove the fuel pressure sensor.