FUEL INJECTOR(for Port Injection) INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips

Perform "Inspection After Repairs" after replacing the fuel injector Click here.

PROCEDURE


  1. INSTALL FUEL INJECTOR ASSEMBLY

    Tech Tips

    Perform "Inspection After Repairs" after replacing the fuel injector Click here.


    1. Apply gasoline to new O-rings and install them to each injector.

      Note

      Check that there is no damage or foreign material in the groove of the injector when installing the O-rings.

    2. A000R1HE01
      Text in Illustration
      *a Stopper

      Install the fuel injector assemblies to the fuel delivery pipe sub-assembly.

      Note


      • Check that there is no damage or foreign material in the inlet of the fuel delivery pipe.

      • Be careful not to twist the O-ring.

      • Install the injector so that its stopper aligns with the positioning gap of the fuel delivery pipe.

  2. INSTALL FUEL DELIVERY PIPE SUB-ASSEMBLY


    1. Install 6 new injection vibration insulators to the intake manifold.

    2. Install the 4 No. 1 delivery pipe spacers to the intake manifold.

    3. Install the delivery pipe sub-assembly (with injector) to the intake manifold.

      Note

      Be careful not to twist the O-ring.

    4. A000NE0E02

      Install the fuel injector assemblies to the fuel delivery pipe sub-assemblies with the 4 bolts in the order shown in the illustration.

      Torque:
      17 N*m  { 173 kgf*cm, 13 ft.*lbf }

    5. Connect the 6 injector connectors and 2 clamps.

    6. Connect the fuel tube sub-assembly to the fuel delivery pipe sub-assembly Click here.

    7. Connect the No. 3 fuel tube sub-assembly to the No. 4 fuel tube sub-assembly Click here.

  3. INSTALL INTAKE AIR SURGE TANK ASSEMBLY

    Click here