REAR CRANKSHAFT OIL SEAL REMOVAL

PROCEDURE


  1. REMOVE HYBRID VEHICLE TRANSMISSION ASSEMBLY

    Click here

  2. REMOVE TRANSMISSION INPUT DAMPER COVER ASSEMBLY


    1. A000NV0E02

      Using SST, hold the crankshaft pulley.

      SST
      09213-70011   ( 09213-70020 )
      09330-00021
    2. A000POQ

      Remove the 9 bolts and transmission input damper cover assembly.

  3. REMOVE FLYWHEEL SUB-ASSEMBLY


    1. A000RKA

      Remove the 8 bolts and flywheel sub-assembly.

  4. REMOVE REAR ENGINE OIL SEAL


    1. A000P0EE02
      Text in Illustration
      *1 Cut Position
      *2 Protective Tape

      Using a knife, cut through the oil seal lip.

    2. Using a screwdriver with its tip taped, pry out the oil seal.

      Note

      After the removal, check the crankshaft for damage. If it is damaged, smooth the surface with 400-grit sandpaper.

      Tech Tips

      Tape the screwdriver tip before use.