FUEL PRESSURE REGULATOR INSTALLATION

PROCEDURE

1. INSTALL FUEL PRESSURE REGULATOR ASSEMBLY

   
   

   1. Apply a light coat of gasoline to 2 new O-rings and then install them to the fuel pressure regulator assembly.

   2. Install the fuel pressure regulator assembly to the fuel filter.

      Note

      Make sure that the O-ring is not cut or pinched during installation.

2. INSTALL FUEL PUMP WITH FILTER ASSEMBLY

   Click here

3. INSTALL NO. 1 FUEL SUCTION SUPPORT

   Click here

4. INSTALL FUEL PUMP HARNESS

   Click here

5. INSTALL JET PUMP

   Click here

6. INSTALL FUEL SENDER GAUGE ASSEMBLY

   Click here

7. INSTALL FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY

   Click here