FUEL INJECTOR(for Port Injection) REMOVAL

PROCEDURE


  1. REMOVE NO. 1 FUEL PIPE SUB-ASSEMBLY

    Click here

  2. DISCONNECT FUEL TUBE SUB-ASSEMBLY


    1. A000OUJ

      Disconnect the fuel tube sub-assembly from the fuel delivery pipe Click here.

  3. REMOVE FUEL DELIVERY PIPE


    1. A000NER

      Disconnect the No. 6 engine wire connector.

    2. Disconnect the 3 wire harness clamps from the fuel delivery pipe and wire harness clamp bracket.

    3. A000NV8

      Disconnect the 4 fuel injector assembly connectors.

    4. Remove the 2 bolts, and then remove the fuel delivery pipe together with the 4 fuel injector assemblies.

      Note

      Be careful not to drop the fuel injector assemblies when removing the fuel delivery pipe.

    5. A000RM7

      Remove the 2 No. 1 delivery pipe spacers from the cylinder head sub-assembly.

    6. Remove the 4 injector vibration insulators from the cylinder head sub-assembly.

  4. REMOVE FUEL INJECTOR ASSEMBLY


    1. A000SJL

      Remove the 4 fuel injector assemblies from the fuel delivery pipe.

      Note

      If the fuel injector assemblies are to be reused, reinstall them to the same cylinder they came from.

    2. Remove the O-ring from each fuel injector assembly.

    3. For reinstallation, attach a tag or label with the corresponding cylinder number to each fuel injector assembly.

      Note

      Protect the fuel injector assemblies by covering them with plastic bags.