SUB RADIATOR REMOVAL

PROCEDURE


  1. REMOVE ENGINE ROOM SIDE COVER

    Click here

  2. REMOVE COOL AIR INTAKE DUCT SEAL

    Click here

  3. REMOVE NO. 1 AIR CLEANER INLET

    Click here

  4. REMOVE ENGINE UNDER COVER

    Click here

  5. REMOVE FRONT SUSPENSION MEMBER BRACE

    Click here

  6. REMOVE NO. 2 ENGINE UNDER COVER

    Click here

  7. DRAIN COOLANT (for Inverter)

    Click here

  8. REMOVE HOOD LOCK ASSEMBLY (for LHD)

    Click here

  9. REMOVE HOOD LOCK ASSEMBLY (for RHD)

    Click here

  10. REMOVE HOOD LOCK RELEASE LEVER PROTECTOR

    Click here

  11. DISCONNECT NO. 2 ENGINE ROOM WIRE

    Click here

  12. DISCONNECT HOOD LOCK CONTROL CABLE COVER (w/ Cover)

    Click here

  13. REMOVE UPPER RADIATOR SUPPORT

    Click here

  14. REMOVE HOOD LOCK CONTROL CABLE COVER (w/ Cover)

    Click here

  15. REMOVE RADIATOR ASSEMBLY


    1. A000POV

      Disconnect the 2 water hoses.

      Note

      Apply insulating tape to the pipes and in the disconnected hoses or cover the pipes and hoses with plastic bags to prevent entry of foreign matter.

    2. Remove the 2 bolts.

    3. Detach the 2 claws and remove the radiator assembly.