HYBRID BATTERY SYSTEM, Diagnostic DTC:P3011-123, P3012-123, P3013-123, P3014-123, P3015-123, P3016-123, P3017-123, P3018-123, P3019-123, P3020-123, P3021-123, P3022-123, P3023-123, P3024-123, P3025-123, P3026-123, P3027-123, P3028-123, P3029-123, P302F-123

DTC Code DTC Name
P3011-123 Battery Block 1 Becomes Weak
P3012-123 Battery Block 2 Becomes Weak
P3013-123 Battery Block 3 Becomes Weak
P3014-123 Battery Block 4 Becomes Weak
P3015-123 Battery Block 5 Becomes Weak
P3016-123 Battery Block 6 Becomes Weak
P3017-123 Battery Block 7 Becomes Weak
P3018-123 Battery Block 8 Becomes Weak
P3019-123 Battery Block 9 Becomes Weak
P3020-123 Battery Block 10 Becomes Weak
P3021-123 Battery Block 11 Becomes Weak
P3022-123 Battery Block 12 Becomes Weak
P3023-123 Battery Block 13 Becomes Weak
P3024-123 Battery Block 14 Becomes Weak
P3025-123 Battery Block 15 Becomes Weak
P3026-123 Battery Block 16 Becomes Weak
P3027-123 Battery Block 17 Becomes Weak
P3028-123 Battery Block 18 Becomes Weak
P3029-123 Battery Block 19 Becomes Weak
P302F-123 Battery Block 20 Becomes Weak

DESCRIPTION


DTC No. INF Code DTC Detection Condition Trouble Area

P3011

P3012

P3013

 123 Presence of a malfunctioning block is determined based on each battery block voltage (1 trip detection).

  • HV battery

  • Battery smart unit
P3014 123 Presence of a malfunctioning block is determined based on each battery block voltage (1 trip detection).

  • HV battery

  • Battery smart unit

  • Service plug grip

P3015

P3016

P3017

P3018

P3019

P3020

P3021

P3022

P3023

P3024

P3025

P3026

P3027

P3028

P3029

P302F

 123 Presence of a malfunctioning block is determined based on each battery block voltage (1 trip detection).

  • HV battery

  • Battery smart unit

Tech Tips


  • P3011-123 to P302F-123 will not be set unless the vehicle is driven for approximately 10 minutes after clearing the DTCs.

  • In order to ensure HV battery performance, appropriate cooling performance must be maintained. Perform the following items as necessary. If cooling performance has decreased and "Maintenance required for hybrid battery cooling parts at your dealer" is displayed on the multi-information display, make sure to perform the following items:

    - Make sure the air intake port is not blocked.

    - Make sure there are no gaps between the connecting parts of the ducts.

    - Clean the filter of the No. 1 or No. 6 hybrid battery intake duct.

    Clear the DTCs to reset the learning values even if no DTCs are stored.

CAUTION / NOTICE / HINT

CAUTION:

When disposing of an HV battery, make sure to return it through an authorized collection agent who is capable of handling it safely. If the HV battery is returned via the manufacturer specified route, it will be returned properly and in a safe manner by an authorized collection agent.

Tech Tips

After the repair, clear the DTCs, perform the following operations, and check that no DTCs are output.


  1. Drive the vehicle on urban roads for approximately 10 minutes. (This DTC may not be stored if the vehicle is stopped or being driven at a constant speed)

PROCEDURE


  1. CHECK DTC OUTPUT (HYBRID CONTROL)


    1. Connect the GTS to the DLC3.

    2. Turn the power switch on (IG).

    3. Enter the following menus: Powertrain / Hybrid Control / Trouble Codes.

    4. Read output DTCs.

      Result
      Result Proceed to
      P0AFC-123 is not output. A
      P0AFC-123 is also output. B

    5. Turn the power switch off.


    B

    GO TO DTC CHART (P0AFC-123) Click here

    A

  2. READ VALUE USING GTS (VB01 - VB20)


    1. Ensure the safety of the areas in front and at the back of the vehicle.

    2. Apply the parking brake and secure the wheels using chocks.

    3. Connect the GTS to the DLC3.

    4. Turn the power switch on (READY).

    5. Fully warm up the engine and turn the air conditioning off.

    6. Enter the following menus: Powertrain / Hybrid Control / Data List / Battery Block Vol -V01 to V20.

    7. Firmly depress the brake pedal with your left foot.

    8. Move the shift lever to D.

    9. Record each battery block voltage from the Data List "Battery Block Vol -V01 to V20" while fully depressing the accelerator pedal.

    10. Compare the battery block voltages "Battery Block Vol -V01 to V20" between the even and odd number groups in each combination shown in the table below.

      Table 1
      Circuit A Battery Block Circuit B Battery Block Condition
      Battery Block Vol - V01 (VB1) Battery Block Vol - V02 (VB2) "Battery Block Vol - V01" - "Battery Block Vol - V02" = 0.3 V or more
      Battery Block Vol - V04 (VB4) Battery Block Vol - V03 (VB3) "Battery Block Vol - V04" - "Battery Block Vol - V03" = 0.3 V or more
      Battery Block Vol - V05 (VB5) Battery Block Vol - V06 (VB6) "Battery Block Vol - V05" - "Battery Block Vol - V06" = 0.3 V or more
      Battery Block Vol - V08 (VB8) Battery Block Vol - V07 (VB7) "Battery Block Vol - V08" - "Battery Block Vol - V07" = 0.3 V or more
      Battery Block Vol - V09 (VB9) Battery Block Vol - V10 (VB10) "Battery Block Vol - V09" - "Battery Block Vol - V10" = 0.3 V or more
      Battery Block Vol - V12 (VB12) Battery Block Vol - V11 (VB11) "Battery Block Vol - V12" - "Battery Block Vol - V11" = 0.3 V or mor
      Battery Block Vol - V13 (VB13) Battery Block Vol - V14 (VB14) "Battery Block Vol - V13" - "Battery Block Vol - V14" = 0.3 V or more
      Battery Block Vol - V16 (VB16) Battery Block Vol - V15 (VB15) "Battery Block Vol - V16" - "Battery Block Vol - V15" = 0.3 V or more
      Battery Block Vol - V17 (VB17) Battery Block Vol - V18 (VB18) "Battery Block Vol - V17" - "Battery Block Vol - V18" = 0.3 V or more
      Battery Block Vol - V20 (VB20) Battery Block Vol - V19 (VB19) "Battery Block Vol - V20" - "Battery Block Vol - V19" = 0.3 V or more
      Table 2
      Circuit A Battery Block Circuit B Battery Block Condition
      Battery Block Vol - V01 (VB1) Battery Block Vol - V02 (VB2) "Battery Block Vol - V02" - "Battery Block Vol - V01" = 0.3 V or more
      Battery Block Vol - V04 (VB4) Battery Block Vol - V03 (VB3) "Battery Block Vol - V03" - "Battery Block Vol - V04" = 0.3 V or more
      Battery Block Vol - V05 (VB5) Battery Block Vol - V06 (VB6) "Battery Block Vol - V06" - "Battery Block Vol - V05" = 0.3 V or more
      Battery Block Vol - V08 (VB8) Battery Block Vol - V07 (VB7) "Battery Block Vol - V07" - "Battery Block Vol - V08" = 0.3 V or more
      Battery Block Vol - V09 (VB9) Battery Block Vol - V10 (VB10) "Battery Block Vol - V10" - "Battery Block Vol - V09" = 0.3 V or more
      Battery Block Vol - V12 (VB12) Battery Block Vol - V11 (VB11) "Battery Block Vol - V11" - "Battery Block Vol - V12" = 0.3 V or more
      Battery Block Vol - V13 (VB13) Battery Block Vol - V14 (VB14) "Battery Block Vol - V14" - "Battery Block Vol - V12" = 0.3 V or more
      Battery Block Vol - V16 (VB16) Battery Block Vol - V15 (VB15) "Battery Block Vol - V15" - "Battery Block Vol - V16" = 0.3 V or more
      Battery Block Vol - V17 (VB17) Battery Block Vol - V18 (VB18) "Battery Block Vol - V17" - "Battery Block Vol - V18" = 0.3 V or more
      Battery Block Vol - V20 (VB20) Battery Block Vol - V19 (VB19) "Battery Block Vol - V20" - "Battery Block Vol - V19" = 0.3 V or more
      A000RPUE05

      Tech Tips

      When an internal malfunction occurs in the battery smart unit, this symptom (difference in voltage of 0.3 V or more for all 10pairs of blocks) will occur.

      Result
      Result Proceed to
      All conditions in table 1 are met. A
      All conditions in table 2 are met.
      Other than above B

    11. Turn the power switch off.


    A

    REPLACE BATTERY SMART UNIT Click here

    B

  3. CHECK DTC OUTPUT (HYBRID CONTROL)


    1. Connect the GTS to the DLC3.

    2. Turn the power switch on (IG).

    3. Enter the following menus: Powertrain / Hybrid Control / Trouble Codes.

    4. Read output DTCs.

      Result
      Result Proceed to
      P3018-123 is not output. A
      P3018-123 is output. B

      Tech Tips

      DTC P3018-123 may also be stored if there is foreign matter, etc. adhering to the connecting part of the service grip.

    5. Turn the power switch off.


    A

    REPLACE HV BATTERY Click here

    B

    REPLACE HV BATTERY AND SERVICE PLUG GRIP