HYBRID CONTROL SYSTEM, Diagnostic DTC:P06B0-163, P06D6-511, P06E6-164, P0A1B-786, P0A1B-794, P1C2B-192, P1C73-512, P1CA7-193, P3134-661
| DTC Code | DTC Name |
|---|---|
| P06B0-163 | Sensor Power Supply "A" Circuit / Open |
| P06D6-511 | Sensor Reference Voltage "F" Circuit / Open |
| P06E6-164 | Sensor Power Supply "C" Circuit / Open |
| P0A1B-786 | Drive Motor "A" Control Module |
| P0A1B-794 | Drive Motor "A" Control Module |
| P1C2B-192 | Drive Motor "A" A/D Converter Circuit |
| P1C73-512 | Sensor Standard Voltage "F" Circuit / Open |
| P1CA7-193 | Drive Motor Control Module Malfunction |
| P3134-661 | Communication Error from Drive Motor "A" to Generator |
DESCRIPTION
The MG ECU located in the inverter with converter assembly monitors its internal operation and it will store DTCs when it detects malfunctions. If any of the following DTCs are output, replace the inverter with converter assembly.
Tech Tips
The term "drive motor A" indicates MG2.
| DTC No. | INF Code | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| P06B0 | 163 | IPM positive power source error | Inverter with converter assembly |
| P06D6 | 511 | Standard voltage for analog signal offset | |
| P06E6 | 164 | IPM negative power source error | |
| P0A1B | 786 | ALU error | |
| 794 | R/D converter communication error | ||
| P1C2B | 192 | A/D converter error | |
| P1C73 | 512 | Standard voltage for analog signal error | |
| P1CA7 | 193 | CPU ROM-RAM error | |
| P3134 | 661 | Communication error (from MG2 to MG1) |
