HYBRID CONTROL SYSTEM, Diagnostic DTC:P0A2B-250, P0A2E-248

DTC Code DTC Name
P0A2B-250 Drive Motor "A" Temperature Sensor Circuit Range / Performance
P0A2E-248 Drive Motor "A" Temperature Sensor Circuit Intermittent

DESCRIPTION

The resistance of the thermistor built into the motor temperature sensor changes in accordance with changes in motor (MG2) temperature. The lower the motor (MG2) temperature, the higher the thermistor resistance. Conversely, the higher the motor (MG2) temperature, the lower the resistance.

Tech Tips

The term "drive motor A" indicates motor (MG2).

A000O0UE06
*1 Resistance (kΩ)
*2 Temperature (°C (°F ))
DTC No. DTC Detection Condition Trouble Area
P0A2B-250

Motor temperature sensor output does not increase under conditions in which the value should increase, or output does not decrease under conditions in which the value should decrease.

(1 trip detection logic)

 Hybrid vehicle transmission assembly (Motor temperature sensor)
P0A2E-248

Sudden change in motor temperature sensor output or hunting Unusual sudden change in motor temperature sensor output occurs and offset condition continues for a certain period of time, or unusual change in motor temperature sensor output occurs repeatedly.

(1 trip detection logic)
Related Data List
DTC No. Data List
P0A2B-250 Motor Temp No1
P0A2E-248

CAUTION / NOTICE / HINT

Tech Tips


  • If DTC P0A2B-250 is output, clear the DTCs, perform the following procedure, and check that the same DTC is not output after the repair.


    1. Drive the vehicle (stop and go driving) on urban roads for approximately 5 minutes. If the Data List item "Motor Temp No1" shows both increases and decreases in temperature, suspected areas indicated by this DTC are not malfunctioning.

  • If DTC P0A2E-248 is output, clear the DTCs, perform the following procedure, and check that the same DTC is not output after the repair.


    1. Turn the power switch on (READY) and wait for 30 seconds or more.

    2. Drive the vehicle for approximately 5 minutes according to the freeze frame data items "Vehicle Spd", "Motor Temp No1" and "Motor Temp No2".

PROCEDURE


  1. REPLACE HYBRID VEHICLE TRANSMISSION ASSEMBLY

    Click here

    Tech Tips

    The motor temperature sensor is not available as a supply part. If it requires replacement, replace the hybrid vehicle transmission assembly.


    NEXT

    COMPLETED