KNOCK SENSOR INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips

Perform "Inspection After Repairs" after replacing the knock sensor Click here.

PROCEDURE


  1. INSTALL KNOCK SENSOR


    1. A000OP6E01
      Text in Illustration
      *A for Bank 1
      *B for Bank 2
      *a View A
      *b View B
      *c Top
      *d Engine Front
      *e Engine Rear
      B002B6O Front
      B002BBR View A
      B002BRO View B

      Install the 2 knock sensors so that they are horizontal as shown in the illustration. Then install the 2 bolts.

      Torque:
      20 N*m  { 204 kgf*cm, 15 ft.*lbf }

      Note

      It is acceptable for the sensor to be tilted +10° to -5°.

      Tech Tips

      Perform "Inspection After Repairs" after replacing the knock sensor Click here.

    2. Connect the 2 knock sensor connectors.

  2. INSTALL FUEL INJECTOR SEAL

    Click here