CRANKSHAFT POSITION SENSOR INSTALLATION

PROCEDURE

1. INSTALL CRANKSHAFT POSITION SENSOR

   
   

   1. Apply a coat of engine oil to an O-ring of the crankshaft position sensor.

      Note

      
      

      • When reusing the crankshaft position sensor, inspect the O-ring.

      • Make sure that the O-ring is not cracked or jammed when installing the crankshaft position sensor.

   2. Install the crankshaft position sensor with the bolt.

      Torque:

      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

   3. Connect the crankshaft position sensor connector.

2. INSTALL COMPRESSOR WITH MOTOR ASSEMBLY

   Click here