CAMSHAFT POSITION SENSOR INSTALLATION

PROCEDURE

1. INSTALL VVT SENSOR (for Exhaust Side of Bank 2)

   
   

   1. Apply a light coat of engine oil to the O-ring of the VVT sensor.

      Note

      
      

      • When reusing the VVT sensor, inspect the O-ring.

      • Make sure that the O-ring is not cracked or jammed when installing the VVT sensor.

   2. Install the VVT sensor with the bolt.

      Torque:

      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

   3. Connect the VVT sensor connector.

2. INSTALL VVT SENSOR (for Intake Side of Bank 2)

   
   

   1. Apply a light coat of engine oil to the O-ring of the VVT sensor.

      Note

      
      

      • When reusing the VVT sensor, inspect the O-ring.

      • Make sure that the O-ring is not cracked or jammed when installing the VVT sensor.

   2. Install the VVT sensor with the bolt.

      Torque:

      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

   3. Connect the VVT sensor connector.

3. INSTALL VVT SENSOR (for Exhaust Side of Bank 1)

   
   

   1. Apply a light coat of engine oil to the O-ring of the VVT sensor.

      Note

      
      

      • When reusing the VVT sensor, inspect the O-ring.

      • Make sure that the O-ring is not cracked or jammed when installing the VVT sensor.

   2. Install the VVT sensor with the bolt.

      Torque:

      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

   3. Connect the VVT sensor connector.

4. INSTALL VVT SENSOR (for Intake Side of Bank 1)

   
   

   1. Apply a light coat of engine oil to the O-ring of the VVT sensor.

      Note

      
      

      • When reusing the VVT sensor, inspect the O-ring.

      • Make sure that the O-ring is not cracked or jammed when installing the VVT sensor.

   2. Install the VVT sensor with the bolt.

      Torque:

      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

   3. Connect the VVT sensor connector.

5. INSTALL V-BANK COVER SUB-ASSEMBLY

   Click here