CAMSHAFT POSITION SENSOR REMOVAL

PROCEDURE


  1. REMOVE V-BANK COVER SUB-ASSEMBLY

    Click here

  2. REMOVE VVT SENSOR (for Intake Side of Bank 1)


    1. A000OTQ

      Disconnect the VVT sensor connector.

    2. Remove the bolt and VVT sensor.

  3. REMOVE VVT SENSOR (for Exhaust Side of Bank 1)


    1. A000QPK

      Disconnect the VVT sensor connector.

    2. Remove the bolt and VVT sensor.

  4. REMOVE VVT SENSOR (for Intake Side of Bank 2)


    1. A000RKF

      Disconnect the VVT sensor connector.

    2. Remove the bolt and VVT sensor.

  5. REMOVE VVT SENSOR (for Exhaust Side of Bank 2)


    1. A000OBB

      Disconnect the VVT sensor connector.

    2. Remove the bolt and VVT sensor.