ECM REMOVAL

PROCEDURE


  1. REMOVE LUGGAGE COMPARTMENT FLOOR MAT

    Click here

  2. REMOVE LUGGAGE COMPARTMENT TRIM COVER LH

    Click here

  3. PRECAUTION

    Note

    After turning the power switch off, waiting time may be required before disconnecting the cable from the auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the auxiliary battery terminal notice before proceeding with work Click here.

  4. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  5. REMOVE ENGINE ROOM SIDE COVER

    Click here

  6. REMOVE COOL AIR INTAKE DUCT SEAL

    Click here

  7. REMOVE ECM

    A000SRQ

    1. Disconnect the 2 ECM connectors and wire harness clamp.


      1. Push in the locks on the 2 levers, raise the levers, and disconnect the 2 ECM connectors.

        Note

        After disconnecting the connectors, make sure that dirt, water or other foreign matter does not contact the connecting part of the connectors.

    2. A000OBN

      for LHD:

      Disconnect the clamp.

    3. A000R9G

      for RHD:

      Disconnect the 2 clamps.

    4. A000OMT

      Remove the 2 nuts and ECM.

  8. REMOVE ECM BRACKET


    1. A000N83

      Remove the 2 bolts and ECM bracket.

  9. REMOVE NO. 2 ECM BRACKET


    1. A000QY5

      Remove the 2 bolts and No. 2 ECM bracket.

  10. REMOVE ENGINE ROOM ECU COVER

    A000RQP

    1. Disconnect the 3 claws and engine room ECU cover.

  11. REMOVE ENGINE ROOM ECU BOX