CAMSHAFT OIL CONTROL VALVE INSTALLATION

PROCEDURE


  1. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE (for Intake Side of Bank 2)


    1. A000SEUE01
      Text in Illustration
      *1 O-Ring

      Apply a light coat of engine oil to a new O-ring and install it to the oil control valve.

    2. Install the oil control valve with the bolt.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

      Note


      • Do not allow foreign matter to contact the oil seal face of the camshaft timing oil control valve (the surface that contacts the cylinder head cover).

      • Be careful that the O-ring is not cracked when installing the camshaft timing oil control valve.

    3. Connect the camshaft timing oil control valve connector.

  2. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE (for Exhaust Side of Bank 2)


    1. A000SEUE01
      Text in Illustration
      *1 O-Ring

      Apply a light coat of engine oil to a new O-ring and install it to the oil control valve.

    2. Install the oil control valve with the bolt.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

      Note


      • Do not allow foreign matter to contact the oil seal face of the camshaft timing oil control valve (the surface that contacts the cylinder head cover).

      • Be careful that the O-ring is not cracked when installing the camshaft timing oil control valve.

    3. Connect the camshaft timing oil control valve connector.

  3. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE (for Intake Side of Bank 1)


    1. A000SEUE01
      Text in Illustration
      *1 O-Ring

      Apply a light coat of engine oil to a new O-ring and install it to the oil control valve.

    2. Install the oil control valve with the bolt.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

      Note


      • Do not allow foreign matter to contact the oil seal face of the camshaft timing oil control valve (the surface that contacts the cylinder head cover).

      • Be careful that the O-ring is not cracked when installing the camshaft timing oil control valve.

    3. Connect the camshaft timing oil control valve connector.

  4. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE (for Exhaust Side of Bank 1)


    1. A000SEUE01
      Text in Illustration
      *1 O-Ring

      Apply a light coat of engine oil to a new O-ring and install it to the oil control valve.

    2. Install the oil control valve with the bolt.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

      Note


      • Do not allow foreign matter to contact the oil seal face of the camshaft timing oil control valve (the surface that contacts the cylinder head cover).

      • Be careful that the O-ring is not cracked when installing the camshaft timing oil control valve.

    3. Connect the camshaft timing oil control valve connector.

  5. INSTALL V-BANK COVER SUB-ASSEMBLY

    Click here