KNOCK SENSOR INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips

Perform "Inspection After Repair" after replacing the knock control sensor.

w/ EGR System: Click here
w/o EGR System: Click here

PROCEDURE

INSTALL KNOCK CONTROL SENSOR
1. Text in Illustration
  
  *a Top
  
  *b Engine Front
  
  Install the knock control sensor to the cylinder block sub-assembly with the bolt as shown in the illustration.
  
  Torque:
  
  20 N*m { 204 kgf*cm, 15 ft.*lbf }
  Note
  - Make sure that the knock control sensor is in the correct position.
  - If a knock control sensor has been struck or dropped, replace it.
  Tech Tips
  
  Perform "Inspection After Repair" after replacing the knock control sensor.
  - w/ EGR System: Click here
  - w/o EGR System: Click here
2. Connect the knock control sensor connector.
INSTALL INTAKE MANIFOLD

Click here