ENGINE COOLANT TEMPERATURE SENSOR REMOVAL

PROCEDURE


  1. DRAIN ENGINE COOLANT

    Click here

  2. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY

    Click here

  3. DISCONNECT ENGINE WIRE


    1. A000Q5U

      Disconnect the 3 wire harness clamps and engine wire.

  4. REMOVE ENGINE COOLANT TEMPERATURE SENSOR


    1. Disconnect the engine coolant temperature sensor connector.

    2. A000NJU

      Using a 19 mm ball joint lock nut wrench, remove the engine coolant temperature sensor from the water outlet sub-assembly.

    3. Remove the gasket from the engine coolant temperature sensor.