IGNITION COIL AND SPARK PLUG INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. INSTALL SPARK PLUG

   
   

   1. Install the 4 spark plugs to the cylinder head sub-assembly.

      Torque:

      25 N*m  { 255 kgf*cm, 18 ft.*lbf }

      Note

      If a spark plug has been struck or dropped, replace it.

      Tech Tips

      
      

      • Install the same parts to their original positions.

      • Perform "Inspection After Repair" after replacing a spark plug.

        w/ EGR System: Click here

        w/o EGR System: Click here

2. INSTALL IGNITION COIL ASSEMBLY

   
   

   1. Install the 4 ignition coil assemblies to the cylinder head cover sub-assembly with the 4 bolts.

      Torque:

      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

      Note

      If an ignition coil assembly has been struck or dropped, replace it.

      Tech Tips

      
      

      • Install the same parts to their original positions.

      • Perform "Inspection After Repair" after replacing an ignition coil assembly.

        w/ EGR System: Click here

        w/o EGR System: Click here

   2. Connect the engine wire to the cylinder head cover sub-assembly with the 3 nuts.

      Torque:

      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

   3. Connect the 4 ignition coil assembly connectors.

3. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY

   Click here