MASS AIR FLOW METER INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. INSTALL MASS AIR FLOW METER SUB-ASSEMBLY

   
   

   1. Install the mass air flow meter sub-assembly to the air cleaner cap sub-assembly with the 2 screws.

      Torque:

      1.0 N*m  { 10 kgf*cm, 9 in.*lbf }

      Note

      Make sure that the O-ring is not cracked or moved out of place when installing the mass air flow meter sub-assembly.

      Tech Tips

      Perform "Inspection After Repair" after replacing the mass air flow meter sub-assembly.

      
      

      • w/ EGR System: Click here

      • w/o EGR System: Click here

   2. Connect the mass air flow meter sub-assembly connector.