THROTTLE BODY REMOVAL

PROCEDURE


  1. DRAIN ENGINE COOLANT

    Click here

  2. REMOVE ENGINE ROOM SIDE COVER

    Click here

  3. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY

    Click here

  4. REMOVE AIR CLEANER CAP WITH NO. 2 AIR CLEANER HOSE


    1. A000RS5

      Disconnect the mass air flow meter sub-assembly connector.

    2. Disconnect the wire harness clamp from the air cleaner cap with No. 2 air cleaner hose.

    3. Detach the 4 clamps.

    4. Loosen the hose clamp to remove the air cleaner cap with No. 2 air cleaner hose.

  5. REMOVE AIR CLEANER HOSE ASSEMBLY


    1. A000R2G

      Slide the clamp and disconnect the ventilation hose from the cylinder head cover sub-assembly.

    2. Loosen the hose clamp to remove the air cleaner hose assembly from the throttle body with motor assembly.

  6. REMOVE THROTTLE BODY WITH MOTOR ASSEMBLY


    1. Disconnect the throttle body with motor assembly connector.

    2. A000NO8E01
      Text in Illustration
      *1 No. 3 Water By-pass Hose
      *2 No. 2 Water By-pass Hose

      Slide the 2 clamps and disconnect the No. 3 water by-pass hose and No. 2 water by-pass hose from the throttle body with motor assembly.

    3. Remove the 4 bolts and throttle body with motor assembly from the intake manifold.

    4. Remove the throttle body gasket from the intake manifold.