INSIDE VEHICLE GENERAL MAINTENANCE

CAUTION / NOTICE / HINT

• These are maintenance and inspection items that are considered to be the owner's responsibility.

  The owner can do them or they can have them done at a service center.

  These items include those that should be checked on a daily basis, those that in most cases do not require special tools, and those that are considered to be reasonable for the owner to do.

  General maintenance items and procedures are as follows:

PROCEDURE

1. GENERAL NOTES

   
   

   • Maintenance requirements vary depending on the country.

   • Check the maintenance schedule in the owner's manual supplement.

   • Determine the appropriate time to service the vehicle using either miles driven or time (months) elapsed, whichever reaches the specification first.

   • Maintain similar intervals between periodic maintenance unless noted.

   • Failing to check each vehicle part could lead to poor engine performance and increase exhaust emissions.

2. LIGHTS

   
   

   1. Check that the headlights, stop lights, taillights, turn signal lights, and other lights illuminate or blink properly. Also, check if they have enough brightness.

   2. Check that the headlights are aimed properly.

3. WARNING LIGHTS AND BUZZERS

   
   

   1. Check that all the warning lights and buzzers are working.

4. HORNS

   
   

   1. Check if the horns is working correctly.

5. WINDSHIELD GLASS

   
   

   1. Check for scratches, pits or abrasions.

6. WINDSHIELD WIPER AND WASHER

   
   

   1. Check that the washers are aimed properly. Also, check that the washer fluid hits the center of the operating range of each wiper on the windshield.

   2. Check if the wipers streak. Replace them if necessary.

7. WINDSHIELD DEFROSTER

   
   

   1. When the air conditioning is on the defroster setting, check that air comes out of the defroster outlets.

8. REAR VIEW MIRROR

   
   

   1. Check that the rear view mirror is securely mounted.

9. SUN VISORS

   
   

   1. Check that the sun visors move freely and are securely mounted.

10. STEERING WHEEL

    
    

    1. Check that the steering wheel has the proper amount of free play. Also check for steering difficulty and unusual noise.

11. SEATS

    
    

    1. Check that the seat adjusters, seatback recliner and other seat controls operate smoothly.

    2. Check that all the latches lock securely in all positions.

    3. Check that the locks hold securely in all positions.

    4. Check that the headrests move up and down smoothly and that the locks hold securely in all latched positions.

    5. Check power seat function.

       
       
       1. 

          Text in Illustration

          *a	Sliding Function
          *b	Front Vertical Function
          *c	Lifter Function
          *d	Reclining Function
          *e	Lumbar Support Adjustment Function
          *f	Cushion Length Function
          *g	Pelvis Support Function
          *h	Side Support Function
          *i	Front Seat back Adjustment Function

          for Driver Side:

          
          

          1. Operate the power seat switches and check that each seat function operates properly:

          
          

          • Sliding function

          • Front vertical function

          • Lifter function

          • Reclining function

          • Lumbar support adjustment function

          • Cushion length function*1, *2

          • Pelvis support function*1, *2

          • Side support function*1, *2

          • Front seat adjustment function*2

          
          

          • *1: for Sports Seat Type

          • *2: for Luxury Seat Type

       2. 

          Text in Illustration

          *a	Sliding Function
          *b	Front Vertical Function
          *c	Lifter Function
          *d	Reclining Function
          *e	Lumbar Support Adjustment Function
          *f	Ottoman Function
          *g	Pelvis Support Function
          *h	Side Support Function
          *i	Front Seat back Adjustment Function

          for Front Passenger Side (for Ottoman):

          
          

          1. Operate the power seat switches and check that each seat function operates properly:

          
          

          • Sliding function

          • Front vertical function

          • Lifter function

          • Reclining function

          • Lumbar support adjustment function

          • Ottoman function

          • Pelvis support function

          • Side support function

          • Front seat adjustment function

       3. 

          Text in Illustration

          *a	Sliding Function
          *b	Front Vertical Function
          *c	Lifter Function
          *d	Reclining Function
          *e	Lumbar Support Adjustment Function
          *f	Cushion Length Function
          *g	Pelvis Support Function
          *h	Side Support Function
          *i	Front Seat back Adjustment Function

          for Front Passenger Side (except Ottoman):

          
          

          1. Operate the power seat switches and check that each seat function operates properly:

          
          

          • Sliding function

          • Front vertical function

          • Lifter function

          • Reclining function

          • Lumbar support adjustment function

          • Cushion length function*

          • Pelvis support function*

          • Side support function*

          • Front seat adjustment function*

          
          

          • *: for Luxury Seat Type

12. SEAT BELTS

    
    

    1. Check that the seat belt components, such as the buckles, retractors and anchors, operate properly and smoothly.

    2. Check that the belt webbing is not cut, frayed, worn or damaged.

13. ACCELERATOR PEDAL

    
    

    1. Check that the pedal operates smoothly. Check that the pedal does not have uneven resistance or stick in certain positions.

14. BRAKE PEDAL

    
    

    1. Check that the brake pedal operates smoothly.

    2. Check that the pedal has the proper reserve distance and free play.

    3. Turn the power switch on (READY) and check the brake system indicator.

15. BRAKES

    
    

    1. In a safe place, check that the vehicle does not pull or lead to the side when applying the brakes.

16. PARKING BRAKE

    
    

    1. Turn the power switch on (READY) and move the shift lever to D. Then depress the brake pedal and push the electric parking brake switch assembly to the lock side for 1 second. Check the parking brake indicator light (red) condition.

    2. Release the brake pedal and check that the vehicle does not move.

    3. Depress the brake pedal and pull the electric parking brake switch assembly to the release side for 1 second. Check the parking brake indicator light (red) condition.

    4. Release the brake pedal and check that the vehicle moves.

17. HYBRID VEHICLE TRANSMISSION "PARK" MECHANISM

    
    

    1. Check the lock release button of the shift lever for proper and smooth operation.

    2. Check the shift lever for proper and smooth operation.

    3. When the shift lever is in P and all brakes are released in an area that has a slight grade, check that the vehicle is stable.

18. FLOOR MATS

    
    

    1. Check that the correct floor mats are used, and that they are properly installed.