REAR LIGHT ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT REAR LIGHT ASSEMBLY LH


    1. A000R1UE02
      Text in Illustration
      *A w/ Rear Fog Light
      *a

      Component without harness connected

      (Rear Light Assembly LH)

      Apply battery voltage to the connector and check the light illumination condition.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → a12-1 (B)

      Battery negative (-) → a12-3 (E)

      		 Tail light illuminates

      Battery positive (+) → a12-2 (T/P)

      Battery negative (-) → a12-3 (E)

      		 Back up light illuminates

      Battery positive (+) → a12-4 (B)

      Battery negative (-) → a12-3 (E)

      		 Rear fog light illuminates *A

      Battery positive (+) → a12-5 (B)

      Battery negative (-) → a12-3 (E)

      		 Stop light illuminates

      *A: w/ Rear Fog Light

      If the result is not as specified, replace the rear light assembly LH.

  2. INSPECT REAR LIGHT ASSEMBLY RH


    1. A000QFAE02
      Text in Illustration
      *A w/ Rear Fog Light
      *a

      Component without harness connected

      (Rear Light Assembly RH)

      Apply battery voltage to the connector and check the light illumination condition.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → a14-1 (B)

      Battery negative (-) → a14-3 (E)

      		 Tail light illuminates

      Battery positive (+) → a14-2 (T/P)

      Battery negative (-) → a14-3 (E)

      		 Back up light illuminates

      Battery positive (+) → a14-4 (B)

      Battery negative (-) → a14-3 (E)

      		 Rear fog light illuminates *A

      Battery positive (+) → a14-5 (B)

      Battery negative (-) → a14-3 (E)

      		 Stop light illuminates

      *A: w/ Rear Fog Light

      If the result is not as specified, replace the rear light assembly LH.