REAR LIGHT ASSEMBLY INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL REAR LIGHT GASKET LH


    1. install a new rear light gasket LH to the rear light lens and body LH.

  2. INSTALL REAR LIGHT ASSEMBLY LH


    1. Install the rear light assembly LH with the 4 nuts.

      Torque:
      4.5 N*m  { 46 kgf*cm, 40 in.*lbf }

      Note

      If a clip is damaged or becomes detached from the vehicle, replace it with a new one.

    2. Connect the connector.

  3. INSTALL LUGGAGE COMPARTMENT DOOR COVER

    Click here

  4. INSTALL SWITCH BEZEL (w/ Power Trunk Lid System)

    Click here

  5. INSTALL LUGGAGE COMPARTMENT DOOR ASSIST GRIP

    Click here

  6. INSTALL LUGGAGE COMPARTMENT DOOR INSIDE HANDLE (w/ Handle)

    Click here

  7. INSTALL LUGGAGE LOCK CONTROL CABLE PLATE (w/ Handle)

    Click here