REAR COMBINATION LIGHT ASSEMBLY REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE REAR BUMPER COVER

    Click here

  2. REMOVE ROPE HOOK

    Click here

  3. DISCONNECT LUGGAGE COMPARTMENT TRIM INNER COVER LH


    1. A000PCM

      Disconnect the rear side of the luggage compartment trim inner cover LH so that the nut of the rear combination light assembly LH can be removed.

      Note

      To avoid creasing the luggage compartment trim inner cover LH, do not fold it back to far.

  4. REMOVE REAR COMBINATION LIGHT ASSEMBLY LH


    1. A000S1Q

      Put protective tape around the rear combination light assembly LH.

      Text in Illustration
      B002BQR Protective Tape
    2. A000OZH

      Disconnect the connector.

    3. Remove the 3 nuts.

    4. Detach the wire harness clamp.

    5. Detach the 2 clips, guide and remove the rear combination light assembly LH.

  5. REMOVE UPPER REAR BUMPER RETAINER LH


    1. A000SQF

      Detach the 2 claws and remove the upper rear bumper retainer LH.

  6. REMOVE REAR COMBINATION LIGHT GUIDE


    1. Remove the rear combination light guide from the body.

  7. REMOVE REAR COMBINATION LIGHT LENS GASKET LH


    1. A000OVV

      Remove the rear combination light lens gasket LH.