SIDE TURN SIGNAL LIGHT ASSEMBLY INSPECTION

PROCEDURE

1. INSPECT SIDE TURN SIGNAL LIGHT ASSEMBLY LH

   
   
   1. 

      Text in Illustration

      *a	Component without harness connected (Side Turn Signal Light Assembly LH)

      Apply auxiliary battery voltage to the connector and check the light illumination condition.

      OK
      Measurement Condition Specified Condition Auxiliary battery positive (+) → Terminal 1 Auxiliary battery negative (-) → Terminal 2 Illuminates

      If the result is not as specified, replace the side turn signal light assembly LH.

2. INSPECT SIDE TURN SIGNAL LIGHT ASSEMBLY RH

   
   
   1. 

      Text in Illustration

      *a	Component without harness connected (Side Turn Signal Light Assembly RH)

      Apply auxiliary battery voltage to the connector and check the light illumination condition.

      OK
      Measurement Condition Specified Condition Auxiliary battery positive (+) → Terminal 1 Auxiliary battery negative (-) → Terminal 2 Illuminates

      If the result is not as specified, replace the side turn signal light assembly RH.