FOG LIGHT ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT FOG LIGHT ASSEMBLY LH

    A000SIBE01
    Text in Illustration
    *a

    Component without harness connected

    (Fog Light Assembly LH)


    1. Apply battery voltage to the connector and check the light illumination condition.

      OK
      Condition Specified Condition

      Battery positive (+) → Terminal 2

      Battery negative (-) → Terminal 1

      Illuminates

      If the result is not as specified, replace the fog light assembly LH.

  2. INSPECT FOG LIGHT ASSEMBLY RH

    A000SIBE01
    Text in Illustration
    *a

    Component without harness connected

    (Fog Light Assembly RH)


    1. Apply battery voltage to the connector and check the light illumination condition.

      OK
      Condition Specified Condition

      Battery positive (+) → Terminal 2

      Battery negative (-) → Terminal 1

      Illuminates

      If the result is not as specified, replace the fog light assembly RH.