HEADLIGHT ASSEMBLY(for Triple Beam Headlight) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE FRONT BUMPER COVER


    1. except Sport Package:

      Click here

    2. for Sport Package:

      Click here

  2. REMOVE UPPER FRONT FENDER PROTECTOR LH


    1. A000R4Z

      Detach the 3 clips and guide to remove the upper front fender protector LH.

  3. REMOVE HEADLIGHT ASSEMBLY LH


    1. A000OAR

      Put protective tape around the headlight assembly LH.

      Text in Illustration
      B002BQR Protective Tape

    2. Detach the claw to release the connector lock and disconnect the connector.

    3. Remove the 3 screws and bolt.

    4. A000PABE02
      Text in Illustration
      *a Place Hand Here
      *b Guide

      Place your hand at the location shown in the illustration, and disconnect the bracket from the seat of the screw.

      Note

      Be careful not to break the bracket.

    5. Detach the guide and pull the headlight assembly LH forward to remove it.