| DTC Code | DTC Name |
|---|---|
| B2437 | Camera High Temperature Malfunction |
DESCRIPTION
This DTC is stored when the forward recognition camera has a high temperature malfunction at night.
| DTC Code | DTC Detection Condition | Trouble Area |
|---|---|---|
| B2437 | Forward recognition camera high temperature malfunction |
|
CAUTION / NOTICE / HINT
Note
When replacing the forward recognition camera, make sure to replace it with a new one. If a device which was installed to another vehicle is used, the information stored in the forward recognition camera will not match the information from the vehicle and, as a result, a DTC may be stored.
When the forward recognition camera is replaced, always perform beam axis adjustment for the forward recognition camera Click here.
If the headlight ECU sub-assembly LH has been replaced, it is necessary to synchronize the vehicle information and initialize the headlight ECU sub-assembly LH Click here.
Tech Tips
This DTC is only output when a malfunction occurs at night.
PROCEDURE
CLEAR DTC
Clear the DTCs Click here.
| NEXT |
|
CHECK FOR FORWARD RECOGNITION CAMERA
Move the vehicle to a cool place in order to lower the temperature of the forward recognition camera.
Cover the automatic light control sensor with a lightproof object.
Turn the power switch on (IG).
Check for DTCs Click here.
| OK |
|---|
| DTC B2437 is not output. |
| OK |
|
END (ADAPTIVE HIGH BEAM SYSTEM STOPPED DUE TO REACHING HIGH TEMPERATURE) |
| NG |
|
REPLACE FORWARD RECOGNITION CAMERA
Replace the forward recognition camera with a new one.
Turn the power switch on (IG).
Clear the DTCs Click here.
Perform beam axis adjustment for the forward recognition camera Click here.
Cover the automatic light control sensor with a lightproof object.
Check for DTCs Click here.
| OK |
|---|
| DTC B2437 is not output. |
| OK |
|
END (FORWARD RECOGNITION CAMERA WAS DEFECTIVE) |
| NG |
|
REPLACE HEADLIGHT ECU SUB-ASSEMBLY LH Click here |