LIGHTING SYSTEM CUSTOMIZE PARAMETERS

PROCEDURE


  1. CUSTOMIZE LIGHTING SYSTEM (EXT)

    Tech Tips

    The following items can be customized.

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Record the current settings before customizing.


    1. Customizing with the GTS.


      1. Connect the GTS to the DLC3.

      2. Turn the power switch on (IG).

      3. Turn the GTS on.

      4. Enter the following menus: Body Electrical / Main Body / Utility / Customize / Light Control or Warning.

      5. Select the setting by referring to the table below.

        Warning
        Display Default Content Setting Relevant ECU
        Lane Change Flashing Times Setting 3 Function to change the lane change flashing times OFF, 3, 4, 5, 6, 7 Combination meter assembly
        Light Control
        Display Default Content Setting Relevant ECU
        Response Time*2 Normal Changes the delay timing of lighting the taillights when going into a tunnel when the light control switch is in the AUTO position. Normal, Long Main body ECU (Multiplex network body ECU)
        Disp Ex ON Sen NORMAL Changes the ambient brightness level required to dim the lights such as the indicator lights of the combination meter, A/C indicator light and clock.*A LIGHT2, LIGHT1, NORMAL, DARK1 or DARK2 Main body ECU (Multiplex network body ECU)
        Disp Ex OFF Sen NORMAL Changes the ambient brightness level required to cancel the dimming of the lights such as the indicator lights of the combination meter, A/C indicator light and clock.*B LIGHT2, LIGHT1, NORMAL, DARK1 or DARK2 Main body ECU (Multiplex network body ECU)
        Light Auto OFF Delay*1 30 s Function to continue illuminating the headlights and taillights for a certain period of time after closing the driver door after the power switch is turned from on (IG) to off with the headlight dimmer switch in the AUTO position and the headlights and taillights on. OFF, 30 s, 60 s or 90 s Main body ECU (Multiplex network body ECU)
        Sensitivity Normal Adjusts the sensitivity of the automatic light control system.*C Light2, Light1, Normal, Dark1 or Dark2 Main body ECU (Multiplex network body ECU)
        DRL Function*3 ON Turns the DRL function on/off. ON or OFF Main body ECU (Multiplex network body ECU)
        Light up Clearance Lights at Door Unlock Function ON Turns on the clearance lights and the taillights for 15 seconds when the doors are unlocked by the smart key or the wireless key. ON or OFF Main body ECU (Multiplex network body ECU)
        Follow Me Home Lighting Time*4 30 s Changes the low beam headlight lighting time when power switch is off and headlight dimmer switch is pulled to flash headlights once. 30 s, 60 s, 90 s, or 120 s Main body ECU (Multiplex network body ECU)

        • *1: Vehicles displaying the Item "Light Auto OFF Delay" on the GTS

        • *2: Vehicles displaying the Item "Response Time" on the GTS

        • *3: Vehicles displaying the Item "DRL Function" on the Techstream

        • *4: w/ Follow Me Home System

        Figure 1. *A

        A000PKNE04

        Figure 2. *B

        A000PKNE04

        Figure 3. *C

        A000PKNE06

    2. Customizing with the multi-display


      1. Turn the power switch on (IG).

      2. Enter the following menus: MENU / Setup / Vehicle / Vehicle Customization / Lights Settings.

      3. Select the setting by referring to the table below.

        Display Default Content Setting Relevant ECU
        Headlight-On Sensitivity 0 Adjusts the sensitivity of the automatic light control system*A. -2, -1, 0, +1 or +2 Main body ECU (Multiplex network body ECU)
        Headlamps Auto- Off Timer 30 sec. Keeps the headlights on for a certain period of time after turning the power switch off and closing all of doors with the low beam headlights on. Off, 30 sec., 60 sec. or 90 sec. Main body ECU (Multiplex network body ECU)
        Daytime Running Lights* On Turns the DRL function on/off. On or Off Main body ECU (Multiplex network body ECU)

        • *: Vehicles displaying the Item "Daytime running lights" on the multi-information display

        Tech Tips

        The sensitivity adjustment may be difficult to confirm. Check by driving the customer's vehicle.

        Figure 4. *A

        A000PKNE05
        *a System Setting
        *b Dark
        *c Light
        *d Setting

    3. Customization of lane change flasher and turn cancel functions


      1. for LHD

        A000STEE04
        Text in Illustration
        *1 Right Turn *2 Right Lane Change
        *3 NEUTRAL *4 Left Lane Change
        *5 Left Turn *6 Wiper Speed Setting P4
        *7 Wiper Speed Setting P3 *8 Wiper Speed Setting P2
        *9 Wiper Speed Setting P1 *10 Off
        *11 WPDN *12 NEUTRAL
        *13 WPUP *14 HI
        *15 Headlight Dimmer Switch Assembly *16 Windshield Wiper Switch Assembly

      2. for RHD (Dimmer Switch RH Side)

        A000PGPE02
        Text in Illustration
        *1 Wiper Speed Setting P4 *2 Wiper Speed Setting P3
        *3 Wiper Speed Setting P2 *4 Wiper Speed Setting P1
        *5 Off *6 WPDN
        *7 NEUTRAL *8 WPUP
        *9 HI *10 Left Turn
        *11 Left Lane Change *12 NEUTRAL
        *13 Right Lane Change *14 Right Turn
        *15 Windshield Wiper Switch Assembly (for LH Side) *16 Headlight Dimmer Switch Assembly (for RH Side)

      3. for RHD (Dimmer Switch LH Side)

        A000STEE04
        Text in Illustration
        *1 Right Turn *2 Right Lane Change
        *3 NEUTRAL *4 Left Lane Change
        *5 Left Turn *6 Wiper Speed Setting P4
        *7 Wiper Speed Setting P3 *8 Wiper Speed Setting P2
        *9 Wiper Speed Setting P1 *10 Off
        *11 WPDN *12 NEUTRAL
        *13 WPUP *14 HI
        *15 Headlight Dimmer Switch Assembly (for LH Side) *16 Windshield Wiper Switch Assembly (for RH Side)

      4. Customize the lane change flasher and turn cancel functions by following the procedures shown below.

        Step Operation Remark
        1

        1. Turn the power switch off.

        2. Move the windshield wiper switch assembly and headlight dimmer switch assembly to the NEUTRAL position.

        		 -
        2

          When setting the lane change flasher control to on:

        1. Set the number of blinks for the lane change flasher control.


          1. Refer to the following items and select wiper speed switch position P1, P2 or P3.


            1. Blinks 3 times: P1

            2. Blinks 5 times: P2

            3. Blinks 7 times: P3

          When setting the lane change flasher control to off:

        1. Select wiper speed switch position P4.

        		 Do not operate the wiper speed switch after step 3.
        3

        1. Move the windshield wiper switch assembly from the NEUTRAL position to the OFF position and hold it there.

        • Steps 3, 4 and 5 are operations for changing to lane change flasher setting mode.

        • If operations other than those described in steps 3, 4 or 5 are performed, the control will change to normal mode. Start from step 1 again.
        4

        1. Turn the power switch on (IG).
        5

          Perform the following operations:

        1. Keep the windshield wiper switch assembly in the OFF position for 5 seconds or more.

        2. Move the windshield wiper switch assembly from the OFF position to the WPDN position.

        3. Keep the windshield wiper switch assembly in the WPDN position for 5 seconds or more.

        4. Move the windshield wiper switch assembly from the WPDN position to the OFF position.

        5. Perform operations 1 to 3 again.

        6. Move the windshield wiper switch assembly from the WPDN position to the NEUTRAL position.
        6

        1. Check that the mode has changed to lane change flasher control setting mode.

          OK
          The right turn signal lights blink once.
        		While changing to lane change flasher control setting mode, wiper control and turn signal light control cannot be performed.
        7

        1. Confirm the selected setting (number of blinks) by performing the following operations:


          1. Move the headlight dimmer switch assembly from the NEUTRAL position to the left lane change position.

          2. Move the headlight dimmer switch assembly to the NEUTRAL position.

        1. Set and confirm the canceling method by performing the following operations:


          • Canceling by operating the lever in the opposite direction


            1. Move the headlight dimmer switch assembly from the NEUTRAL position to the left lane change position.

            2. Move the headlight dimmer switch assembly to the NEUTRAL position.

          • Canceling by operating the lever in the same direction


            1. Move the headlight dimmer switch assembly from the NEUTRAL position to the right lane change position.

            2. Move the headlight dimmer switch assembly to the NEUTRAL position.

        • If operations other than those described in step 7 are performed, the control will change to normal mode. Start from step 1 again.

        • Make sure to finish step 7 within approximately 20 seconds.
        8

        1. Check the answer back for completion of setting the number of blinks of the lane change flasher control.


          • Blinks 3 times

            OK
            The left turn signal lights blink once.

          • Blinks 5 times

            OK
            The left turn signal lights blink twice.

          • Blinks 7 times

            OK
            The left turn signal lights blink 3 times.

        1. Check the answer back for completion of changing the turn cancel function.


          • Canceling by operating the lever in the opposite direction

            OK
            Canceling by operating the lever in the opposite direction

          • Canceling by operating the lever in the same direction

            OK
            The left turn signal lights blink 5 times.

          If the answer back cannot be confirmed:

        • If 20 seconds or more had elapsed while performing step 7, the control will have changed to normal mode. Start from step 1 again.
        9 Setting is complete. Lane change flasher control setting mode changes to normal mode.