AUTOMATIC HEADLIGHT BEAM LEVEL CONTROL
General
The automatic headlight beam level control system ensures forward visibility and prevents dazzling of drivers in oncoming and preceding vehicles by controlling the headlight beam level vertically when the weight of passengers and loads has caused the vehicle attitude to change.
Function of Main Components
| Component | Outline |
|---|---|
| Headlight ECU Sub-assembly LH and RH | Receives various signals, calculates changes in the vehicle posture, and actuates the headlight leveling motor. |
| Headlight Leveling Motor | Based on the signals received from the headlight ECU sub-assembly LH or RH, the motors move the reflectors in the headlight to change the low beam angle. |
| Rear Height Control Sensor Sub-assembly LH | Transmits a height control sensor signal to the headlight light control ECU sub-assembly LH. |
| Skid Control ECU Assembly | Transmits a speed sensor signal to the headlight light control ECU sub-assembly LH. |
| Power Management Control ECU | Transmits a READY ON status signal to the headlight ECU sub-assembly LH. |
| Main Body ECU (Multiplex Network Body ECU) | Transmits a headlight status signal to the headlight ECU sub-assembly LH. |
| Combination Meter Assembly | If the system malfunctions, "Headlight System Malfunction Visit Your Dealer" will be displayed on the multi-information display in the combination meter assembly in accordance with the signal from the headlight ECU sub-assembly LH. |
Initial Set Control
When the power switch is on (READY), the headlight ECU sub-assembly LH drives the headlight leveling motor and moves the headlight reflector to the lower limit position and returns it to the proper position. The headlight ECU sub-assembly LH thus assesses the position of the headlight for reference control.