WASHER LEVEL WARNING SWITCH REMOVAL

PROCEDURE


  1. REMOVE FRONT WHEEL LH

  2. REMOVE FRONT FENDER LINER LH


    1. A000PXM

      Using a screwdriver, turn each pin 90 degrees counterclockwise and remove the 2 pin hold clips.

    2. A000Q0C

      Remove the 12 screws.

    3. A000Q77

      Remove the 7 clips and the front fender liner LH.

  3. DRAIN WASHER FLUID


    1. A000SSD

      Disconnect the washer hose from the windshield washer motor and pump assembly, and drain the washer fluid.

      Tech Tips

      Use a container to collect the washer fluid.

  4. REMOVE LEVEL WARNING SWITCH ASSEMBLY


    1. A000QKW

      Disconnect the connector.

    2. Remove the level warning switch assembly as shown in the illustration.