WASHER MOTOR REMOVAL

PROCEDURE


  1. REMOVE FRONT BUMPER ASSEMBLY


    1. except Sport Package:

      Click here

    2. for Sport Package:

      Click here

  2. REMOVE FRONT WHEEL LH

  3. REMOVE ENGINE UNDER COVER

    Click here

  4. REMOVE FRONT FENDER LINER LH


    1. A000ODI

      Remove the 9 screws.

    2. A000MT7

      Remove the 7 clips and front fender liner LH.

  5. REMOVE NO. 3 COOL AIR INTAKE DUCT SUB-ASSEMBLY


    1. A000N4M

      Remove the bolt and clip.

    2. A000O84

      Detach the 2 claws and remove the No. 3 cool air intake duct sub-assembly.

  6. DRAIN WASHER FLUID


    1. A000OFY

      Disconnect the washer hose from the windshield washer motor and pump assembly, and drain the washer fluid.

      Tech Tips

      Use a container to collect the washer fluid.

  7. REMOVE WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY


    1. A000PO6

      Disconnect the connector.

    2. Remove the windshield washer motor and pump assembly as shown in the illustration.