WIPER SWITCH INSPECTION

PROCEDURE


  1. INSPECT WINDSHIELD WIPER SWITCH ASSEMBLY (for RH Side)


    1. A000S4IE03
      Text in Illustration
      *a

      Component without harness connected

      (Windshield Wiper Switch Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Front Washer Switch
      Tester Connection Switch Condition Specified Condition
      N36-4 (EW) - N36-7 (WF) ON Below 1 Ω
      OFF 10 kΩ or higher

      If the result is not as specified, replace the windshield wiper switch assembly.

  2. INSPECT WINDSHIELD WIPER SWITCH ASSEMBLY (for LH Side)


    1. A000SQZE02
      Text in Illustration
      *a

      Component without harness connected

      (Windshield Wiper Switch Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Front Washer Switch
      Tester Connection Switch Condition Specified Condition
      N36-4 (WF) - N36-7 (EW) ON Below 1 Ω
      OFF 10 kΩ or higher

      If the result is not as specified, replace the windshield wiper switch assembly.