OUTER REAR VIEW MIRROR INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL OUTER REAR VIEW MIRROR ASSEMBLY LH


    1. Attach the 2 claws and temporarily install the outer rear view mirror assembly LH.

    2. Install the outer rear view mirror assembly LH with the 3 bolts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

    3. Attach the 2 clamps.

    4. Connect the connector.

  2. INSTALL NO. 2 FRONT DOOR SERVICE HOLE COVER LH


    1. Remove the peeling paper from a new No. 2 front door service hole cover LH.

    2. A000QOQE02
      Text in Illustration
      *1 Reference Point

      Attach the No. 2 front door service hole cover LH according to the reference points on the front door panel.

  3. INSTALL OUTER MIRROR PROTECTOR


    1. Remove the peeling paper from a new outer mirror protector LH.

    2. A000Q0WE02
      Text in Illustration
      *1 Reference Point

      Attach the outer mirror protector LH according to the reference points on the front door panel.

  4. INSTALL FRONT INNER DOOR GLASS WEATHERSTRIP LH

    Click here

  5. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH

    Click here

  6. INSTALL COURTESY LIGHT ASSEMBLY

    Click here

  7. INSTALL FRONT DOOR HOLE COVER


    1. Install the front door hole cover.

  8. INSTALL MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY WITH FRONT UPPER ARMREST BASE PANEL LH (for Driver Side)

    Click here

  9. INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT UPPER ARMREST BASE PANEL RH (for Front Passenger Side)

    Click here

  10. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG LH

    Click here

  11. CHECK OUTER REAR VIEW MIRROR ASSEMBLY LH

    Click here

  12. CHECK POWER WINDOW

    Click here

  13. CHECK POWER DOOR LOCK OPERATION

    Click here