WASHER LEVEL WARNING SWITCH INSTALLATION

PROCEDURE


  1. INSTALL LEVEL WARNING SWITCH ASSEMBLY


    1. A000N99

      Install the level warning switch assembly.

    2. Connect the connector.

    3. A000PCP

      Connect the washer hose to the windshield wiper motor and pump assembly.

  2. ADD WASHER FLUID

    Click here

  3. INSTALL FRONT FENDER LINER LH


    1. Install the 7 clips.

    2. Install the 12 screws.

    3. A000O1NE01
      Text in Illustration
      *a Correct
      *b Incorrect

      Install the 2 pin hold clips as shown in the illustration.

      Note

      Insert the pin hold clip with the slot aligned vertically. Do not rotate the clip after inserting it. After installation, confirm that the slot is aligned vertically.

  4. INSTALL FRONT WHEEL LH

    Click here