LUGGAGE DOOR HINGE TORSION BAR REMOVAL

CAUTION / NOTICE / HINT

CAUTION:

Remove the luggage door hinge torsion bar while holding the luggage compartment door panel.

PROCEDURE


  1. REMOVE LUGGAGE COMPARTMENT FLOOR MAT


    1. Remove the luggage compartment floor mat.

  2. REMOVE LUGGAGE COMPARTMENT TRIM COVER LH


    1. Remove the luggage compartment trim cover LH.

  3. REMOVE LUGGAGE COMPARTMENT TRIM COVER RH


    1. Remove the luggage compartment trim cover RH.

  4. REMOVE SIDE TRIM BOX


    1. Remove the side trim box.

  5. REMOVE LUGGAGE COMPARTMENT SIDE TRAY (w/ Spare Tire)


    1. Remove the luggage compartment side tray.

  6. REMOVE LUGGAGE COMPARTMENT TRIM BOX (w/o Spare Tire)


    1. Remove the luggage compartment trim box.

  7. REMOVE SPARE WHEEL COVER TRAY (w/o Spare Tire)


    1. Remove the spare wheel cover tray.

  8. REMOVE ROPE HOOK ASSEMBLY

    B002BAD

    Tech Tips

    Use the same procedure for all rope hooks.


    1. Detach the 2 claws and open the cover.

    2. B002C4H

      Remove the bolt and rope hook assembly.

  9. REMOVE REAR LUGGAGE COMPARTMENT TRAY BRACKET LH


    1. B002BUJ

      Remove the clip.

    2. Detach the claw and remove the rear luggage compartment tray bracket LH.

  10. REMOVE REAR LUGGAGE COMPARTMENT TRAY BRACKET RH

    Tech Tips

    Use the same procedure described for the LH side.

  11. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK


    1. B002BL4

      Detach the 2 claws and remove the No. 1 luggage compartment trim hook.

  12. REMOVE NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY

    Click here

  13. REMOVE REAR LUGGAGE COMPARTMENT TRIM COVER

    B002B49

    1. Remove the 3 No. 2 luggage compartment trim hooks as shown in the illustration.

    2. B002C4S

      Remove the 5 clips.

    3. Detach the 3 guides and remove the rear luggage compartment trim cover.

  14. REMOVE REAR FLOOR FINISH PLATE


    1. B002B86

      Remove the 3 clips.

    2. B002B65

      Detach the 6 clips and remove the rear floor finish plate.

  15. REMOVE FRONT LUGGAGE COMPARTMENT TRIM COVER


    1. B002BQG

      Remove the 3 clips, 2 nuts and front luggage compartment trim cover.

  16. REMOVE ROPE HOOK

    B002BJQ

    Tech Tips

    Use the same procedure for both rope hooks.


    1. Pinch the rope hook as indicated by the arrows in the illustration to remove the rope hook.

  17. REMOVE LUGGAGE COMPARTMENT TRIM INNER COVER LH

    B002BLS

    1. Using a clip remover, remove the clip.

    2. Detach the 2 claws and remove the clip.

    3. Detach the clip and remove the luggage compartment trim inner cover LH.

  18. REMOVE LUGGAGE COMPARTMENT TRIM INNER COVER RH

    B002BFG

    1. Using a clip remover, remove the clip.

    2. Detach the 2 claws and remove the clip.

    3. Detach the clip and remove the luggage compartment trim inner cover RH.

  19. REMOVE LUGGAGE LOCK CONTROL CABLE PLATE (w/ Handle)

    Click here

  20. REMOVE LUGGAGE COMPARTMENT DOOR INSIDE HANDLE (w/ Handle)

    Click here

  21. REMOVE LUGGAGE COMPARTMENT DOOR ASSIST GRIP

    Click here

  22. REMOVE SWITCH BEZEL (w/ Power Trunk Lid System)

    Click here

  23. REMOVE LUGGAGE COMPARTMENT DOOR COVER

    Click here

  24. REMOVE LUGGAGE COMPARTMENT DOOR HINGE COVER LH

    Click here

  25. REMOVE LUGGAGE COMPARTMENT DOOR HINGE COVER RH

    Tech Tips

    Use the same procedure described for the LH side.

  26. REMOVE LUGGAGE DOOR HINGE TORSION BAR LH


    1. B002B83E02
      Text in Illustration
      *1 Washer (90201-10008)

      Install the washer (90201-10008) to SST as shown in the illustration.

      SST
      09804-24010
      Standard
      Area Specified Condition
      A 4.5 mm (0.177 in.)
    2. B002BRK

      Detach the 2 claws and open the cover.

      Note

      If the cover of the luggage compartment door torsion bar support is opened, replace the luggage compartment door torsion bar support with a new one.

    3. B002C12

      Disconnect the luggage door hinge torsion bar LH from the luggage compartment door torsion bar support.

    4. B002BSV

      Using SST, disconnect the luggage door hinge torsion bar LH from the luggage compartment door hinge as shown in the illustration.

    5. B002BO6

      Detach the 3 guides and remove the luggage door hinge torsion bar LH.

  27. REMOVE LUGGAGE DOOR HINGE TORSION BAR RH


    1. B002BK4E02
      Text in Illustration
      *1 Washer (90201-10008)

      Install the washer (90201-10008) to SST as shown in the illustration.

      SST
      09804-24010
      Standard
      Area Specified Condition
      A 4.5 mm (0.177 in.)
    2. B002BIH

      Disconnect the luggage door hinge torsion bar RH from the luggage compartment door torsion bar support.

    3. B002B4O

      Using SST, disconnect the luggage door hinge torsion bar RH from the luggage compartment door hinge as shown in the illustration.

    4. B002BCP

      Detach the 3 guides and remove the luggage door hinge torsion bar RH.

  28. REMOVE LUGGAGE COMPARTMENT DOOR TORSION BAR SUPPORT


    1. B002BS4

      Rotate the luggage compartment door torsion bar support in the direction indicated by the arrow in the illustration to remove the luggage compartment door torsion bar support.