HOOD LOCK CONTROL CABLE ASSEMBLY(for LHD) REMOVAL

PROCEDURE


  1. REMOVE ENGINE ROOM SIDE COVER

    Click here

  2. REMOVE COOL AIR INTAKE DUCT SEAL

    Click here

  3. REMOVE FRONT FENDER UPPER PROTECTOR LH


    1. A000S7O

      Detach the 3 clips and remove the front fender upper protector LH.

  4. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

  5. REMOVE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY


    1. A000NSM

      Detach the 3 claws.

    2. A000RX0

      Remove the hood lock control lever sub-assembly from the hood lock control cable assembly.

  6. REMOVE HOOD LOCK RELEASE LEVER PROTECTOR


    1. Disconnect the connector and detach the 2 clamps.

    2. A000OBO

      Remove the 2 clips and hood lock release lever protector.

  7. REMOVE HOOD LOCK ASSEMBLY


    1. A000NOI

      Remove the 3 bolts.

    2. A000S1A

      Remove the hood lock from the hood lock control cable assembly.

  8. REMOVE NO. 1 AIR CLEANER INLET (w/ Cover)

    Click here

  9. REMOVE UPPER RADIATOR SUPPORT (w/ Cover)


    1. A000MV4

      Detach the 2 claws and remove the 2 screws.

    2. Disconnect each connector.

    3. A000SM0

      Remove the 5 bolts and upper radiator support.

  10. REMOVE HOOD LOCK CONTROL CABLE COVER (w/ Cover)


    1. A000S4E

      Detach the guide and remove the hood lock control cable cover.

  11. REMOVE NO. 2 HOOD LOCK CONTROL CABLE COVER (w/ Cover)


    1. A000RVC

      Remove the screw.

    2. Detach the claw and remove the No. 2 hood lock control cable cover.

  12. REMOVE HOOD LOCK CONTROL CABLE ASSEMBLY


    1. A000RAEE01
      Text in Illustration
      *1 String

      Tie a string to the end of the hood lock control cable assembly as shown in the illustration.

      Tech Tips

      Use a length of string long enough to pass through the engine compartment.

    2. Detach each clamp, and then pull out the hood lock control cable assembly from the vehicle body.

    3. Untie the string from the hood lock control cable assembly.

      A000T4FE02
      Text in Illustration
      *A w/o Cover *B w/ Cover
      *1 Hood Lock Control Cable *2 Stopper