DATA LIST
Tech Tips
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
Note
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Connect the GTS to the DLC3.
Turn the power switch on (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / (desired system) / Data List /
According to the display on the GTS, read the "Data List".
| Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
|---|---|---|---|
| Half Latch SW | Luggage compartment door lock assembly half-latch switch signal / ON or OFF | ON: Half-latch switch of luggage compartment door lock assembly on (Luggage compartment door open) OFF: Half-latch switch of luggage compartment door lock assembly off (Luggage compartment door closed) |
|
| Pawl Position Switch | Luggage compartment door lock assembly pawl position switch signal / ON or OFF | ON: Pawl position switch of luggage compartment door lock assembly on OFF: Pawl position switch of luggage compartment door lock assembly off (Luggage compartment door closed) |
|
| Closer Sensor Battery Voltage | Luggage door closer assembly sensor voltage display | 0 to 25.5 V | 6.4 V or Higher |
| #Codes | Number of trouble codes/Min.: 0, Max.: 255 | Number of DTCs stored | - |
| IG SW | Power switch on (IG) / ON or OFF | ON: Power switch on (IG) OFF: Power switch off |
"OFF" is also displayed for this item when the power switch is on (ACC). |
| Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
|---|---|---|---|
| Trunk Lock/Unlock SW* | Luggage compartment door lock cylinder switch signal / ON or OFF | ON: Luggage compartment door lock cylinder on (Luggage compartment door opened) OFF: Luggage compartment door lock cylinder off (Luggage compartment door closed) |
Not applicable |
*: Although the item is displayed on the GTS, it is not applicable to this vehicle.
| Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
|---|---|---|---|
| Tr/B-Door Unlock SW | Luggage electrical key switch / ON or OFF | ON: Luggage electrical key switch pushed OFF: Luggage electrical key switch not pushed |
When this item is abnormal, there is a problem with the luggage electrical key switch of the luggage door lock assembly or related parts. |
ACTIVE TEST
Tech Tips
Using the GTS to perform the Active Tests allows relays, VSVs and actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
Connect the GTS to the DLC3.
Turn the power switch on (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / (desired system) / Active Test.
According to the display on the GTS, perform the "Active Test".
| Tester Display | Test Part | Control Range | Diagnostic Note |
|---|---|---|---|
| Latch Release | Operate luggage compartment door latch release | ON/OFF | - |