LUGGAGE COMPARTMENT DOOR OPENER SYSTEM DATA LIST / ACTIVE TEST


  1. DATA LIST

    Note

    In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.

    Tech Tips

    Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.


    1. Connect the GTS to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / (desired system) / Data List /

    5. According to the display on the GTS, read the Data List.

      Back Door
      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      Half Latch SW Luggage compartment door lock assembly half-latch switch signal / ON or OFF

      ON: Half-latch switch of luggage compartment door lock assembly on (Luggage compartment door open)

      OFF: Half-latch switch of luggage compartment door lock assembly off (Luggage compartment door closed)

      • See "Luggage Compartment Door Closer Operation Timing Chart" Click here.

      • When this item is abnormal, there is a problem with the half-latch switch of the luggage compartment door lock assembly or related parts.
      Pawl Position Switch Luggage compartment door lock assembly pawl position switch signal / ON or OFF

      ON: Pawl position switch of luggage compartment door lock assembly on

      OFF: Pawl position switch of luggage compartment door lock assembly off (Luggage compartment door closed)

      • See "Luggage Compartment Door Closer Operation Timing Chart" Click here.

      • When this item is abnormal, there is a problem with the pawl position switch of the luggage compartment door lock assembly or related parts.
      IG SW Power switch on (IG) / ON or OFF

      ON: Power switch on (IG)

      OFF: Power switch off

      		 "OFF" is also displayed for this item when the power switch is on (ACC).
      Main Body
      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      Trunk Lock Position Luggage compartment door lock signal / Lock or Unlock

      Lock: Luggage compartment door lock assembly locked

      Unlock: Luggage compartment door lock assembly unlocked

      		 -
      Trunk Main SW Luggage door opening cancel switch signal / ON or OFF

      ON: Luggage door opening cancel switch is on

      OFF: Luggage door opening cancel switch is off

      		 -
      Trunk/BDoor Open SW Luggage door opening switch signal / ON or OFF

      ON: Luggage door opening switch is on

      OFF: Luggage door opening switch is off

      		 -
      Trunk Lock/Unlock SW* Luggage compartment door lock cylinder switch signal / ON or OFF

      ON: Luggage compartment door lock cylinder on (Luggage compartment door opened)

      OFF: Luggage compartment door lock cylinder off (Luggage compartment door closed)

      		 Not applicable
      Trunk Link with Door Lock Luggage compartment door lock function / ON or OFF Customized value displayed -

      *: Although the item is displayed on the GTS, it is not applicable to this vehicle.

      Entry & Start
      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      Tr/B-Door Unlock SW Luggage electrical key switch / ON or OFF

      ON: Luggage electrical key switch pushed

      OFF: Luggage electrical key switch not pushed

      		 When this item is abnormal, there is a problem with the luggage electrical key switch of the luggage door lock assembly or related parts.

  2. ACTIVE TEST

    Tech Tips

    Using the GTS to perform the Active Tests allows relays, VSVs and actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.


    1. Connect the GTS to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / (desired system) / Active Test /

    5. According to the display on the GTS, perform the "Active Test".

      Back Door
      Tester Display Test Part Control Range Diagnostic Note
      Latch Release Operate luggage compartment door latch release ON or OFF -